Engineered Rubber and Plastics Solutions | Gulf US

Start A Project
Start A Project

Product Capabilities

From custom-molded rubber components to precision-engineered seals, we offer a wide array of high-quality products.

Fabric Reinforced Diaphragms

HCR

LSR

Fabric reinforced diaphragms are a type of thin wall diaphragm that are used in automotive applications, aerospace, medical device...

Fabric reinforced diaphragms are a type of thin wall diaphragm that are used in automotive applications, aerospace, medical device components, the oil and gas industry, and more. We recommend partnering with a fabric reinforced diaphragm manufacturer that has the experience, uses quality materials, has customization capabilities, and more.

Colors:

Materials:

Sizes:

Valved Introducer

LSR

A valved introducer is a medical device used to insert catheters or other instruments into the body. It is...

A valved introducer is a medical device used to insert catheters or other instruments into the body. It is a medical device component that requires precision control and high quality medical grade materials. The quality of product your valved introducer manufacturer uses is paramount for increased patient safety, which is always top priority for any medical device component manufacturing.

Colors:

Materials:

Sizes:

Convoluted Diaphragm

HCR

LSR

Over Molding

Convoluted diaphragms have a distinct wavy, accordion-like design which enables flexibility and increased range of motion. This enhanced flexibility...

Convoluted diaphragms have a distinct wavy, accordion-like design which enables flexibility and increased range of motion. This enhanced flexibility allows them to stretch and compress making them ideal for pumps and compressors, actuators, and medical devices.

Colors:

Materials:

Sizes:

Pipe Gaskets

HCR

Over Molding

We design and engineer both custom and standard gaskets for pipes of all materials including pre and post inserted...

We design and engineer both custom and standard gaskets for pipes of all materials including pre and post inserted seal for PVC/plastic pipe, seals for ductile iron applications, seals for concrete pipes, and gaskets for polypropylene sewer, drainage and water applications. We specialize in the engineering of TYTON™ gaskets for static applications to seal joins, flanges, and other surfaces. Pipe gaskets are made of chlorine resistant compounds given its consistent exposure to chlorine-rich environments.

Colors:

Materials:

Sizes:

Bellows

HCR

Molded Shapes

Over Molding

Rubber bellows (also known as expansion joints) are used to protect moving mechanical parts from air, dust, and humidity....

Rubber bellows (also known as expansion joints) are used to protect moving mechanical parts from air, dust, and humidity. The concertinaed sides allow the rubber bellow to expand and contract whilst maintaining a permanent seal. Bellows are often used in medical device component applications and made of a chlorine resistant compound.

Colors:

Materials:

Sizes:

Clamp

LSR

Over Molding

As a surgical grip manufacturer, we specialize in instruments and medical device components that are used in surgical environments....

As a surgical grip manufacturer, we specialize in instruments and medical device components that are used in surgical environments. Given the rigorous disinfection protocols inherent to medical settings, a significant portion of medical device components, such as clamp grips, are engineered using chlorine resistant compounds that can also be repeatedly sterilized in a steam autoclave.

Colors:

Materials:

Sizes:

Duckbills

HCR

LSR

Duckbill check valves are a simple and effective way to stop reverse flow and unwanted entry into a fluid...

Duckbill check valves are a simple and effective way to stop reverse flow and unwanted entry into a fluid path, especially for medical devices. Duckbill check valves typically have a very low operating pressure required to open and are often designed and engineered from chlorine resistant compounds. The liquid silicone rubber duckbill geometry can be customized for your project, including functional performance regarding cracking / opening pressure, forward flow rate range at a specified pressure, and minimum check pressure to prevent reverse flow.

Colors:

Materials:

Sizes:

Flow Controls

HCR

LSR

Flow controls are engineered to maintain constant volume output with varying inlet pressure. They are either “variable orifices” or...

Flow controls are engineered to maintain constant volume output with varying inlet pressure. They are either “variable orifices” or membranes that produce a relatively constant flow rate over a range of pressures. Often used in water irrigation controls and made of chlorine resistant compounds, flow controls are an essential part of many applications. Liquid silicone rubber medical manufacturing is used to create flow controls for medical device components.

Colors:

Materials:

Sizes:

Molded Shapes

HCR

LSR

Molded Shapes

We have the ability to mold custom geometries for high consistency rubber (HCR) and liquid silicone rubber (LSR) applications...

We have the ability to mold custom geometries for high consistency rubber (HCR) and liquid silicone rubber (LSR) applications across multiple industries. A core competency includes liquid silicone rubber medical manufacturing for medical device components. For specific applications, molded shapes can be engineered with compounds that are resistant to chlorine or other chemicals and perform superbly despite application-specific physical demands and environmental conditions.

Colors:

Materials:

Sizes:

Umbrella Valves

HCR

LSR

Umbrella check valves allow flow in one direction and prevent flow in the opposite direction. They typically open when...

Umbrella check valves allow flow in one direction and prevent flow in the opposite direction. They typically open when the fluid pressure differential exceeds a specified range. As a liquid silicone rubber medical device component manufacturer, we can customize the geometry and material for your project to fine tune functional performance like cracking / opening pressure, forward flow rate range at a specified pressure, and minimum check pressure to prevent reverse flow.

Colors:

Materials:

Sizes:

Washers / Discs / Seals

HCR

LSR

Elastomer washers, discs, and flat seals are commonly used in static sealing and insulation applications as well as in...

Elastomer washers, discs, and flat seals are commonly used in static sealing and insulation applications as well as in water irrigation controls. Liquid silicone rubber medical manufacturing is also used for medical device components. Washers, discs, and seals are oftentimes made of chlorine resistant compounds with good chemical and mechanical wear resistance properties in addition to low compression set results to ensure seal integrity over extended periods of time. Material selection is critical for overcoming harsh environmental conditions and chemical exposure.

Colors:

Materials:

Sizes:

O Rings

HCR

LSR

Seals

Rubber O-rings are designed to seal in either static or dynamic applications under a wide range of temperature and...

Rubber O-rings are designed to seal in either static or dynamic applications under a wide range of temperature and chemical exposure by utilizing elastomer materials selected for that particular set of conditions, which may include resistance to chlorine or other harsh chemicals, to seal connections and prevent leaks, especially in water irrigation controls. Liquid silicone rubber medical manufacturing is also used for medical device components in the healthcare industry.

Colors:

Materials:

Sizes:

Thin Wall Diaphragms

HCR

LSR

Over Molding

By definition, rubber diaphragms are flexible seals that prevent unwanted transmission of substances between two places. These substances can...

By definition, rubber diaphragms are flexible seals that prevent unwanted transmission of substances between two places. These substances can be liquids, gasses, or solutions. They are characteristically tough and dynamic and essential in many flow control applications such as water irrigation controls and pumping. As a liquid silicone rubber manufacturer, we also engineer pressure switch diaphragms used in medical device components and made of chlorine resistant compounds.

Colors:

Materials:

Sizes:

Medical Instruments

LSR

Over Molding

We specialize in engineering surgical handle grips for orthopedic surgical instruments, other medical device components used in a variety...

We specialize in engineering surgical handle grips for orthopedic surgical instruments, other medical device components used in a variety of total joint applications, and dental instruments. For grips, we use our liquid silicone rubber (LSR) medical manufacturing process. These are designed to bond perfectly to the instrument with no gaps or separation to prevent incursion of bioburden at the interface between the stainless steel and LSR. This chemical and mechanical bond also prevents the grip from being dislodged from the instrument when impacted or torque is applied. The material utilized is capable of repeated use and sterilization in a steam autoclave. Learn more about our process to design and develop your next medical device component or surgical instrument handle grip.

Colors:

Materials:

Sizes:

Combination Valves

HCR

LSR

Molded Shapes

A combination valve allows flow in one direction only on the inside diameter (ID) and the opposite direction on...

A combination valve allows flow in one direction only on the inside diameter (ID) and the opposite direction on the outside diameter (OD). The most common combination valve is the umbrella-duckbill style, but other combinations include bidirectional-umbrella, duckbill-diaphragm, etc. Combination valves are widely used for water irrigation controls. We also use liquid silicone rubber medical manufacturing to engineer medical device components. These are often made of chlorine resistant compounds.

Colors:

Materials:

Sizes:

Balls

HCR

LSR

Small, versatile, and resilient spheres are used in applications such as simple check valve components with spring support indicators...

Small, versatile, and resilient spheres are used in applications such as simple check valve components with spring support indicators to a shuttling valve. These spheres are often made of chlorine resistant compounds meant for chlorine-rich environments. Our liquid silicone rubber medical manufacturing engineers develop these spheres for many healthcare applications as well including medical device components.

Colors:

Materials:

Sizes:

Overmolding

HCR

LSR

Over Molding

Sub-Assembly

Overmolding has many benefits over the traditional assembly processes and can provide products with a) better adhesion between components,...

Overmolding has many benefits over the traditional assembly processes and can provide products with a) better adhesion between components, b) more compact design, c) lower labor costs during production, d) noise and vibration reduction, e) no gaps at the interface to prevent incursion of bio-burden or other contaminants, and f) chemical resistant compounds (e.g., chlorine resistant). Overmolding is often used for liquid silicone rubber medical manufacturing for medical device components, pressure switch diaphragm manufacturing, and in water irrigation control manufacturing.

Colors:

Materials:

Sizes:

Check Valves

Sub-Assembly

A check valve allows fluid flow in one direction and stops, or checks, fluid flow in the opposite direction....

A check valve allows fluid flow in one direction and stops, or checks, fluid flow in the opposite direction. Flow handling performance is determined by the type of check valve selected. Check values are often used in water irrigation controls and healthcare settings for medical device components. Often they are made of chlorine resistant compounds.

Colors:

Materials:

Sizes:

Face Mask

LSR

Molded Shapes

Sub-Assembly

We have expertise in designing and engineering face masks through our liquid silicone rubber manufacturing process. Face masks are...

We have expertise in designing and engineering face masks through our liquid silicone rubber manufacturing process. Face masks are medical device components made of chlorine resistant compounds and used to help aid in air filtration. While face masks are widely used in healthcare and industrial facilities, they can be engineered for multiple verticals with varying specifications.

Colors:

Materials:

Sizes: